Modular configuration
Add or remove links to form the required working ring, subject to final engineering confirmation.
MODULAR HYDRAULIC PILE BREAKER · MODEL 313
Built to crunch concrete.
Designed to keep projects moving.
TECHBOLT Model 313 is a modular pile-crunching system for round reinforced-concrete foundation piles. Its link architecture can be configured to suit multiple pile diameters, subject to engineering review.
TECH POWER TECHNOLOGIES · ENGINEERED EQUIPMENT
320BAR MAXIMUM WORKING PRESSURE
190MM CYLINDER STROKE
240KG PER MODULE
GLOBALDISTRIBUTOR ENQUIRIES OPEN
WHY TECHBOLT
A practical system for demanding pile-head work.
Every application is reviewed against the pile, reinforcement, carrier and hydraulic inputs before a final configuration is confirmed.
Compact architecture
Purpose-designed links concentrate the working system around the pile.
Controlled chisel guidance
Multiple support points help maintain alignment through the working stroke.
Serviceable cylinder assembly
Internal cylinder components are designed for inspection and maintenance within the module.
Local application support
UAE-based customer coordination supports selection, commissioning and after-sales communication.
Made for site realities
The system is developed around access, lifting, hydraulic connection, inspection and service requirements.
WORKING SEQUENCE
How TECHBOLT works
Operation requires an approved method, lifting plan, exclusion zone and equipment checks.
Configure
Select and connect the approved number of links for the reviewed pile application.
Position
Suspend the assembled ring and lower it around the pile to the approved cut-off position.
Crunch
Hydraulically driven chisels move radially inward to fracture the concrete in controlled cycles.
Release
Retract the chisels, lift the ring and continue the approved pile-head removal sequence.
MODULAR SIZING
One module family. Multiple configurations.
The values below reflect the current confirmed CAD sequence. They are a planning guide only; final fit and selection require project-specific confirmation.
Application noteFinal CAD confirmation required
16 links · 2000 mm design reference. Final link count and pile suitability must be confirmed from pile geometry, tolerance, reinforcement, concrete strength, carrier and hydraulic data before supply.
DESIGN DIFFERENCE
Designed differently from typical plate-frame systems.
ConsiderationTECHBOLT Model 313Typical plate-frame system
ConfigurationModular link familyVaries by manufacturer and model
Diameter adjustmentAdd or remove approved linksMay require a different frame or configuration
Cylinder accessServiceable internal module assemblyAccess method varies by design
Structural approachCompact purpose-designed link architectureOften uses connected plates or frames
SupportUAE customer coordination and application reviewDepends on the supplier and territory
Comparison describes general design characteristics. Actual performance and service requirements depend on the specific equipment, carrier, pile and approved working method.
APPLICATIONS
Applications and selection review
Building foundationsInfrastructure projectsBridges and transport worksIndustrial foundationsSpecialist civil engineering
What we need for selection
- Pile diameter and tolerance
- Concrete strength and age
- Reinforcement arrangement
- Cut-off level and pile quantity
- Excavator model and lifting capacity
- Hydraulic flow and pressure
- Site location, access and programme
TECHNICAL QUESTIONS
Start with the application.
What type of pile is TECHBOLT designed for?
Model 313 is presented for round reinforced-concrete foundation piles, subject to an application review.
How is the working diameter changed?
The ring is configured by adding or removing approved links. Final selection depends on actual pile and carrier data.
Can one configuration be approved for every pile?
No. Pile geometry, tolerance, concrete, reinforcement and hydraulic inputs must be reviewed before supply or operation.
How do I request a quotation?
Send the pile, project, carrier and hydraulic information listed in the application-review section.
Is distributorship available outside the UAE?
TECHBOLT is inviting qualified organisations to apply for selected international territories. Appointment is subject to commercial and technical review.
PROJECT APPLICATION
Bring us the pile data. We will review the application.
Share the project location, pile details, quantity, excavator and hydraulic information. The TECHBOLT team will respond with the next technical and commercial steps.